|
|
|
|
Klein + Hummel Pro X 12/60
Hochleistungs-Beschallungs-High Performance PA Loudspeaker
Features
Advantages of a True 3Way System
- Drivers: 2" mid and 1" high frequency coaxial drivers
in one common horn, 12" woofer
- very flat frequency response from 65 Hz to 20 kHz (without
controller!)
- exeptional low distortion
- very high sound pressure (132 dB/SPL at 1 m)
- reduced Doppler effect at important mid frequency range
- reproduction up to 20 kHz without partial oscillations
- Rated power / absolute maximum power 450 / 800 W
Optimized Sound Dispersion
- precise sound directivity from 600 Hz with large 2" horn
- ideal angle of dispersion (60° x 40°) for midthrow
applications
- perfect sound coverage when clustering
- no acoustic interference due to coaxial design of HF and
midrange drivers
State-of-the-Art Driver Technology of 12" woofer
- extra strong die-cast aluminum basket
- rear vented voice coil design for minimal power compression
- minimum LF distortion through extremely long excursion
- surface coatet cone meaning
- reduced distortion
- high internal damping
- wheather resistance
Advantages of a 2"/1" coaxial design vs. one 2" or 1,5" driver
- lower LF frequency of midrange driver (650 Hz)
- higher HF frequency of tweeter (20 kHz)
- higher sound pressure levels and higher continuous load
capacity
- less distortion
- less weight with neodymium magnets
Intelligent Enclosure Design
- flexible flying point mounting with ANCRA-JUNGFALK fittings
- no limitation for high stacking with flying points on
sides
- special enclosure design ensures minimum horizontal distance
between clustered loudspeakers
- homogeneous baffle design without diffraction edges
- large rounded bass reflex ports avoiding air noises
- sturdy metal grill protecting drivers, with option of
acoustic foam behind or in front of grill
- built in steel stand fitting, 35 mm
- other colors optional, on request
|
|
|
|
| Details Klein + Hummel Pro X 12/60 |
| Principle |
Direct
Radiation, Bassreflex |
3-way, passive
|
| Sensitivity
in 1m with 1 W |
|
97,0 dB/SPL
|
| Free
field frequency response |
Passive
(internal x-over) |
65 Hz - 20 kHz (± 3 dB)
|
| with
controller |
60 Hz - 20 kHz (± 2,5 dB)
|
| Nominal
power handling |
|
450 Watts
|
|
Max. power handling |
|
800 Watts
|
| |
--
|
| |
--
|
| |
|
| Max.
SPL in 1m, 180 ms sinewave burst |
|
132,0 dB/SPL
|
| Directivity |
Horizontal
x vetrical (-6 dB) |
60° x 40° , tournable
|
| above |
600 Hz
|
| Elektronics |
| Impedance |
|
8 Ohms
|
| Crossover |
Passive
(internal x-over) |
900 Hz, 18 dB / Oct.
|
| Activ
(with controller modul) |
--
|
| Protection
circuit |
Passive |
Multifuse for tweeter
|
| Active |
Limiter
|
| Mechanical
specs |
| Housing |
|
|
| Material |
18 mm birch multiplex
|
| Surface |
Painted finish
|
| Color |
Standard |
charcoal grey (RAL 7021)
|
| |
--
|
| Option |
optional
|
| Handles |
2
|
| Stand
flange |
on bottom
|
| Dampening
material |
Sheep´s wool
|
| Baffle
cover |
Dent-proof grille
|
| |
acoustic foam inside or outside
|
| Mounting
points |
on
sides |
2 x Ancra Jungfalk flight rails
|
| on
rear |
1 x Ancra Jungfalk flight rails
|
| on
bottom, on top |
--
|
| Dimensions |
Width |
376 mm
|
| Hight |
690 mm
|
| Depth |
415 mm
|
| Weight |
|
38,0 kg
|
| Loudspeakers |
Woofer |
12" long excursion die cast chassis
|
| |
coated cone, weather proof
|
| Tweeter |
1" Neodymium-Coax
|
| Mounting
hardware |
|
FIT 10, LH 36, LH 12/60
|
| |
LH 28 + LH 36
|
| |
LH 29 + LH 36
|
| |
Cradle
|
| Options |
Rain
and transportation cover |
LRH X 12
|
| Terminals |
|
2 x Speakon; Input: +/-, linked to Through
|
| Switch |
active
/ passive |
--
|
| Recommended
controller |
|
PRO C 28
|
| |
PRO C 24
|
| |
PRO A 2000 controller modul
|
| Recommended
amplifiers |
|
PRO A 2000
|
| Recommended
subwoofers |
|
PROX SUB L
|
back | top
|
|
