AVE Verhengsten GmbH & Co.

 

 

Crestron CNI-TVAV

CNI-TVAV – Cresnet Modul zur Steuerung von Mediengeräten

Das CNI-TVAV ist ein Crestron Netzwerkmodul und kommuniziert über den Cresnet Systembus mit der Crestron Steuerzentrale. Die CNI-TVAV beinhaltet einen Infrarotsendeausgang für bis zu fünf unterschiedliche Geräte, vier digitale Ein/Ausgänge eine RS-232 Schnittstelle, einen Stromsensor und einen Cresnet Port.

 

Technische Details Crestron CNI-TVAV:
Power Requirements
  115VAC, 50-60 Hz, 6.5A maximum
LED Indicators
  PWR Illuminates when the CN-TVAV power-in cord is plugged into an energized VAC outlet.
  NET Illuminates when communication with the Cresnet system is occurring or while processing commands from the PC (i.e., uploading programming).
  INPUT-OUTPUT These four LEDs illuminate while the corresponding input or output device that is connected to the rear panel I/O is active.
  PWR
(TV/AV)
Illuminated while the current sensor is detecting that the TV or AV device connected to the power-out receptacle is ON.
  IR Illuminates when IR signals are being sent to that device.
  RXD
(RS-232)
Illuminates when the CN-TVAV is receiving serial data from the RS-232 port.
  TXD
(RS-232)
Illuminates when the CN-TVAV is sending data to the RS-232 port.
  IR IN Illuminates when the CN-TVAV receives a valid IR code from an optional handheld transmitter.
Ports
  CRESNET This 6-pin, 6-position RJ11 modular jack is used to connect the CN-TVAV to a control system so it may be accessed as a Cresnet peripheral.
  RS-232 This 6-pin, 6-position RJ11 modular jack is used for control of RS-232 peripheral devices and to communicate with a personal computer (PC) when programming the CN-TVAV.
  I/O (1-4, G) Pins 1-4 of this Versiport may individually be used as programmable digital inputs, digital outputs, analog inputs, or any combination of each.
  IR This 3.5mm mini-jack is used by the STIRP (provided) to control an attached TV or AV device.
  POWER OUT This receptacle provides AC power to an attached TV or AV device for current-sensry
  POWER IN This attached power cord supplies operating AC power to the CN-TVAV and the attached TV or AV device.
Dimensions
  1.70" / 4.32cm (H) x
7.07" / 17.95cm (W) x
6.32" / 16.06cm (D)
Weight
  3.63lbs. (1.65Kg)
Model Options
All the features of the CN-TVAV, with the following exceptions:
  CNI-TVAV International Version; 220V

 

 

 

zurück | Seitenanfang