| Lenses Supported |
| |
Universal with head or lenses
requiring from +/- 2.5 to +/- 12VDC |
| Presets |
| |
Unlimited number of memorized
pan/tilt head positions and focus/zoom lens settings |
| Connectors |
| |
NET |
(1) 6-wire RJ-type connector;
to Cresnet control network |
| |
LENS |
(1) DB15 female connector;
provides (3) channels for zoom, focus and iris as well as additional
signals depending on lens |
| |
RS-232 |
(1) DB9 female connector; primarily
used to control "smart" lens |
| Jumper Boards |
| Activate LENS output; voltage
dependent |
| |
LENS A |
+/- 12VDC differential drive |
| |
LENS B |
+/- 8VDC differential drive |
| |
LENS C |
+/- 2.5VDC single ended drive
with lens supplied reference |
| |
LENS D |
+/- 6VDC differential drive |
| LED Indicators |
| |
POWER |
Indicates 24VDC power supplied
to unit from network |
| |
NET |
Indicates communication with
Cresnet control system |
| |
CALIB |
Indicates unit entered into
calibration mode |
| |
FZ |
Indicates focus and zoom activity
as the result of manual control at the unit |
| Buttons |
| |
PAN |
Manual pan control of head |
| |
FOCUS |
Manual focus control of camera
lens |
| |
TILT |
Manual tilt control of head |
| |
ZOOM |
Manual zoom control of camera
lens |
| |
CALIB MODE |
Toggles between pan/tilt and
zoom/focus movement. In conjunction with TILT (up) button enables
unit to enter calibration mode. |
| Power Requirements |
| |
24VDC; network power, 60W |
| Max. Camera/Lens Load |
| |
15lbs (6.8Kg) (balanced) |
| Preset Recall Resolution |
| |
+ /- 0.35 degrees |
| Camera Mounting Adjustments |
| |
Three Axis Standard |
0.80" / 2.03cm (H) x
1.75" / 4.45cm (W) x
2.50" / 6.35cm (FRONT/BACK) |
| |
Mounting Hole Spacing |
3.00"/7.62cm to 6.25"/15.88cm |
| |
Angular Travel |
Tilt +/- 90 degrees |
| |
Pan |
Approx. 330 degrees |
| |
Limit Stops |
Externally adjustable for horizontal
and vertical travel; easily accessible with camera and lens
in place |
| |
Unit Mounting |
3.75"/9.53cm diameter
base with (2) screws, 2.00"/5.08cm on center; included |
| |
Mounting Plates |
(1) flat, (1) angled; included |
| |
Drive |
Precision worm gear |
| Operating Speeds |
| |
Pan (horizontal) |
22.5 degrees/second |
| |
Tilt (vertical) |
20.0 degrees/second |
| Enclosure |
| |
Vinyl-coated cast aluminum |
| Dimensions (without mounting
plates) |
| |
6.87" / 17.47cm (H) x
5.50" / 13.97cm (W) x
6.64" / 16.87cm (D) |
| Weight |
| |
8.15lbs (3.70Kg) |
