AVE Verhengsten GmbH & Co.

  

 

Crestron ST-CP

Crestron ST-CP - SmarTouch Control Processor

The ST-CP is the control processor portion of the SmarTouch system. The ST-CP may be purchased individually for use as an inexpensive control processor with built-in 1-way RF gateway.

The ST-CP is an integrated stand alone control system capable of supporting any Cresnet device,touchpanels,etc.in an economical,compact package.

 

Technical Details Crestron ST-CP:

Communication:

Radio Frequency (RF);1-way;434MHz

Communication Ports:

40 MB/s

RF

(1) 50 ohms BNC connector; for use with antenna (included) alone or with standard 50 ohm extension cable (not included)
NET (1) 6-wire RJ-type connector;for expansion to SmarTouch peripherals,Cresnet devices,touchpanels and for programming the SmarTouch touchpanel

PC (1) 6-wire RJ-type connector for communicating to a PC computer when programming

COM A-B (2) 6-wire RJ-type connectors for controlling audio/visual devices via independent RS-232 ports (data rate up to 38,400 baud)

IR OUT A-D (4) RA,3.5mm mini phone jacks for controlling additional audio/visual devices via IR,serial format;requires STIRP IR probe(s).
The IR port can be used with TTL compatible serial interfaces/devices

 

  

 

back | top