AVE Verhengsten GmbH & Co.

 

 

Sony DSR-1800P

Sony DSR-1800AP

Reflecting market demands, employing higher standards of technology and using the experiences of the DSR-2000P, we will innovate the DSR-80P by introducing new line-ups, DSR-1800P. With all these excellence and innovations available, the DSR-1800P will be a major workforce in video production fields by satisfying those highly professionals.

The DSR-1800P provides excellent performance in an editing environment. It has a full range of analogue and digital interfaces, a responsive search dial function and many other powerful features. A key advantage is playback compatibility with DV, DVCAM and DVCPRO (25 Mb/s).
Automatic DV format change
The DSR-1800P automatically detects DV, DVCAM and DVCPRO tape formats.

Playback of three sizes of DV, DVCAM and DVCPRO cassettes
The DV formats include not only DVCAM and DV but also the DVCPRO format. Three cassette sizes utilised for these formats. All these tapes can be played back in the DSR-1800P without any special mechanical adapter.

No need to dub up to other higher formats, which is often required on other DV VTRs
The editing functions such as digital slow motion, jog audio and DMC are all available for all DV tape formats. Superb jog audio lets you easily handle all the DV tape formats as direct editing sources. This means that, even when using DV or DVCPRO recorded tapes as editing sources, there is no need to dub to other, higher, formats.

The wide aspect ID (16:9) can be recorded or erased
Pictures recorded in a 16:9 aspect ratio include a wide aspect ID located in the VITC. The DSR-1800P can record or erase this ID. For example, if you don't want this ID signal to appear on a TV display, this ID can be erased. If the video signal passes through an editing or effects system this ID signal is often removed. The DSR-1800P can re-record it.

Minimised video degradation
Due to a newly developed filter colour blurring during baseband dubbing (e.g. SDI or analogue component) has been significantly reduced.

Save editing time
Until now frame delays in all DV VTRs have made audio dubbing very difficult. However, due to newly developed digital processing and pre-read technology the DSR-1800P has achieved the perfect synchronisation of video and audio.

No Generator required to record a pre-striped tape
The DSR-1800P incorporates an internal signal generator. This generates either colour bars (100% or 75%) or black /burst signals for video and a 1 kHz tone or silence for audio. This function is convenient for recording a pre-striped tape prior to editing.

Easy to locate target point
The DSR-1800P incorporates a built-in Jog/Shuttle dial on its front panel. This enables highly responsive operation, especially when searching for editing points.

Channel condition indicator gives you piece of mind
For ensuring reliable editing conditions, the DSR-1800P is equipped with a channel condition monitoring function. Three levels of error rate are indicated with a tri-colour (G/Y/R) indicator. This is effective for all DV formats (25Mbps).

 

Specification: Sony DSR-1800P
Power Requirements
100 V - 240 V AC,
50/60 Hz
Power consumption
70 W (with all options)
Operation temperatur
5 °C bis 40 °C
Storage temperatur -20 °C bis 60 °C
Weight
13 kg
Tape Speed
28,221 mm/s
Recording-/Playback time Standard-Format
Mini-Format

Fast forward/Rewindtime
Standard-Format
Mini-Format
Searchspeed shuttle mode
digital mode
Video performance

Bandwidth
Luminanz 25 Hz to 5 MHz ±1.0 dB
Chrominanz 25 Hz to 2 MHz +1.0/-2.0 dB
S/N ratio
more than 55 dB
K-Faktor
Less than 2,0 % (K2T,KPB)
Y/C-Versatz Less than 30 ns
Audio performance

Frequency response
2CH mode(48 kHz/16 Bit) 20 Hz to 20 kHz + 0.5/-1.0 dB
4CH mode (32 kHz/12 Bit) 20 Hz to 14.5 kHz + 0.5/-1.0 dB

Dynamic range

More than 90 dB

Distortion (THD + N)

Less than 0,05 % (bei 48 kHz)
Input Signals
Video (Analog)
REF. Video (BNC x 2, Loop-Through connection) 0.3 Vp-p, 75 Ohm, sync negative
Video (BNC x 2, Loop Through-connection) Composite , 1,0 Vp-p, 75 Ohm, sync negative

Componente (BNC x 3)

Y: 1,0 Vp-p, 75 Ohm, sync negative
R-Y: 0,7 Vp-p, 75 Ohm (100%)
B-Y: 0,7 Vp-p, 75 Ohm (100%)
S-Video (DIN 4-pol. x 1) Y: 1,0 Vp-p, 75 Ohm, sync negative
C: 0,286 Vp-p, 75 Ohm (at burst level)
Video (Digital)
SDI (BNC x 1)
*using optional DSBK-1801
Conforms to Serial Digitlal Interface (270 Mb/s), SMTP259M
SDTI (QSDI) (BNC x 1)
*using optional DSBK-1801
Conforms to SDTI (270 Mb/s), SMPTE 305M/322M
i.Link (DV-Ein/Aus) (6-pol. x 1)
*using optional DSBK-1803
IEEE 1394-based
Audio (Analog)
Audio (XLR 3-pol. Buchse x 4) -6/-3/0/+4 dBu, high impedance
Audio (Digital)
AES/EBU (BNC x 2)
*using optional DSBK-1801
75 Ohm, unbalanced
Timecode
Timecode Ein (BNC x 1) 0,5 Vp-p - 18 Vp-p, 3 k Ohm, unbalanced
Output Signals
Video (Analog)
REF. Video (BNC x 1) 0.3 Vp-p, 75 Ohm, sync negtive
Video 1/2/3(Super) (BNC x 3) Composite, 1,0 Vp-p, 75 Ohm, sync negative
Component (BNC x 3) Y: 1,0 Vp-p, 75 Ohm, sync negative
R-Y: 0,7 Vp-p, 75 Ohm (100%)
B-Y: 0,7 Vp-p, 75 Ohm (100%)
S-Video (BNC x 2) Y: 1,0 Vp-p, 75 Ohm, sync negative
C: 0,286 Vp-p, 75 Ohm (at burst mode)
Video (Digital)
SDI (BNC x 2)
*using optional DSBK-1801
Conforms to Serial Digital Interface (270 Mb/s), ITU-R BT.656

SDTI (QSDI) (BNC x 2)
*using optional DSBK-1801

Conforms to SDTI (270 Mb/s), SMPTE 305M/322M
i.Link (DV-Ein/Aus) (6-pol. x 1)
*using optional DSBK-1803
IEEE 1394-based
Audio (Analog)
Audio (XLR 3-pin male x 2) -6/-3/0/+4 dBu (selectable by menu)
Monitor (RCA x 1) -infinitely to -11 dBu, 47k Ohm, unbalanced
(-18 dBFS)
Headphone (JM-60 Headphone jack x 1) -infinitely to -13 dBu, 8 Ohm, unbalanced
(-18 dBFS)
Audio (Digital)

AES/EBU (BNC x 2)
*using optional DSBK-1801

75 Ohm, unbalanced
Timecode
Timecode Aus (BNC x 1) 2,2 Vp-p, 75 Ohm unbalanced
Remote
RS-422A D-sub 9-pin (female) x 1
Video Control D-sub 15-pin (male) x 1
Control S (SIRCS) Stereo mini jack x 1
Supplied accessories
AC power cord x 1
Operating instructions x 1
 

 

back | top