|
Power requirements
|
100 to 240 V AC (±10 %, 50/60 Hz)
|
|
Power consumption
|
230 W
|
|
Operating temperature
|
+ 5 °C to +40 °C (+41 °F to +104 °F)
|
|
Storage temperature
|
-20 °C to +60 °C (-4 °F to +140 °F)
|
|
Operating humidity
|
25 % to 80 % (relative humidity)
|
|
Mass (approx.)
|
30 kg (66 lb. 2 oz)
|
|
Dimensions
(W x H x D excluding protrusions)
|
427 x 218 x 544 mm (16 3/4 x 8 5/8 x 21 1/2 inches)
|
|
Tape speed
|
94.2 mm/s (24P mode)
|
|
Digital recording/Playback time
|
155 min with BCT-124SR cassette (24P mode)
|
|
Fast-forward/rewind time
|
Approx. 3 min with BCT-124SR cassette
|
|
Search-speed range
|
±50 times normal playback speed (24P mode)
|
|
Servo-lock time
|
1.0 sec or less (from standby on)
|
|
Load/unload time
|
6.0 sec or less
|
|
Input/Output
|
|
HD serial V/A input
|
BNC (x1 with monitoring loop-through), Serial digital (1.485
Gb/s),
SMPTE 292M/BTA S-004/ITU-R.BT 709
|
|
HD/SD reference video input 1
|
BNC (x1, with loop-through), Tri Level sync, 0.6 Vp-p, 75
.,
sync negative or Black Burst, 0.286 Vp-p, 75 ., sync negative
|
|
HD/SD reference video input 2 (optional HKSR-5001 required)
|
BNC (x1, with loop-through), Black Burst, 0.286 Vp-p,
75 ., sync negative
|
|
Digital-audio input (CH1/2, CH3/4, CH5/6, CH7/8, CH9/10,
CH11/12)
|
BNC (x6, AES/EBU)
|
|
Time-code input
|
XLR-3-pin type, (female x1), 0.5 to 18 Vp-p, 10 k., balanced
|
|
HD serial V/A output
|
BNC (x3, with character out), Serial digital (1.485 Gb/s),
SMPTE 292M/BTA S004/ITU-R.BT 709
|
|
Format-converter output
(optional HKSR-5001 required)
|
BNC (x2), with character out
|
|
Standard-definition V/A output
|
BNC (x3, with character out), D1 serial digital (270 Mb/s),
SMPTE 259M
|
|
Analog I/O down-converted
output
|
Composite: BNC (x1 with character out) 1.0 Vp-p, 75 ., sync
negative) SD sync: BNC (x1, Black Burst, 0.286 Vp-p, 75 .,
sync negative)
|
|
Analog I/O reference output
|
1125 Sync: BNC (x2), Tri Level sync, 0.6 Vp-p, 75 ., sync
negative
|
|
Digital-audio output (CH1/2 CH3/4
CH5/6 CH7/8 CH9/10 CH11/12)
|
BNC (x6), AES/EBU, unbalanced
|
|
Analog-audio output
(CH1/2/3/4/Cue)
|
XLR-3-pin type, (male x5), +4 dBm, (with a 600 . load), low
impedance, balanced
|
|
Monitor output (L/R)
|
XLR-3-pin type, (male x2), +4 dBm, (with a 600 . load), low
impedance, balanced
|
|
Time-code output
|
XLR-3-pin type, (male x1), 2.2 Vp-p low impedance, balanced
|
|
Phones
|
JM-60 stereo phone jack, - 8 to .12 dBu (with an 8 Ohm load),
unbalanced
|
|
Remote 1 input
|
D-sub 9-pin, (female), Sony 9-pin remote interface
|
|
Remote 1 input/output
|
D-sub 9-pin, (female), Sony 9-pin remote interface
|
|
RS-232C
|
D-sub 9-pin, (male)
|
|
Video control
|
D-sub 9-pin, (female), (for optional HKDV-503)
|
|
Parallel remote
|
D-sub 50-pin, (female)
|
|
Network
|
10Base-T modular jack
|
|
Digital-Video Performance
|
|
Sampling frequency
|
Y: 74.25 MHz, Pb/Pr: 37.125 MHz
|
|
Quantization
|
10 bits/sample
|
|
Compression
|
MPEG-4 Studio Profile
|
|
Channel coding
|
S-NRZ
|
|
Error correction
|
Reed-Solomon code
|
|
Error concealment
|
Adaptive three-dimensional
|
|
Analog Composite-Output Performance
|
|
Bandwidth
|
Y: 0 to 5.75 MHz +5.0 dB/-3.0 dB
|
|
S/N ratio
|
56 dB or more
|
|
Y/C delay
|
15 ns or less
|
|
K Factor (2T Pulse)
|
1 % or less
|
|
Output SCH phase
|
Based upon RS-170A/CCIR R.624-3
|
|
Digital-Audio Performance
|
|
Sampling frequency
|
48 kHz (synchronized with video)
|
|
Quantization
|
24 bits/sample
|
|
Wow & flutter
|
Below measurable level
|
|
Headroom
|
20 dB (or 18 dB selectable)
|
|
Analog Audio-Output Performance
|
|
D/A quantization
|
24 bits/sample
|
|
Frequency response
|
20 Hz to 20 kHz, +0.5 dB/-1.0 dB (0 dB at 1 kHz)
|
|
Dynamic range
|
More than 100 dB (At 1 kHz)
|
|
Distortion
|
Less than 0.05 % (At 1 kHz, reference level)
|
|
Crosstalk
|
Less than –90 dB (At 1 kHz, between any two channels)
|
|
De-emphasis
|
T1 = 50 µs, T2 = 15 µs (auto on/off)
|
